Multifunctional dielectric for sinking erosion
esgeSparc SE 108
esgeSparc SE 108 is a synthetic-based multi-functional dielectric fluid for the modern requirements of the newest sinking erosion. esgeSparc SE 108 is completely odorless and water clear. It is almost free of aromatics and particularly skin-friendly.
esgeSparc SE 108 was developed for the requirements of the mold and tool manufacturers in the field of plastics and die casting industrie. Due to its medium viscosity, esgeSparc SE 108 is ideally suited for the finishing and roughing applications. As a result, large workpieces can be produced on machines with high current ratings (> 60Amp), but also low roughness can be achieved. Due to the extremely low boiling range of only 12 ° C, esgeSparc SE 108 is a very innovative dielectric which guarantees a high removal rate while minimizing electrode wear.
esgeSparc SE 108 is waterclear to create high visibility of the machining process. Due to the high flash point, the best possible working safety is ensured. esgeSparc SE 108 can be filtered with all common filter systems.
|Technical Data||Test method||Units||Values|
|Density at 15 °C||ASTM D4052||g/ml||0,76|
|Kinematic Viscosity at 20 °C||ASTM D445||cSt||3,0|
|Flash Point (PM) °C||ASTM D93||°C||>104|
|Boiling range||ASTM D86||°C||233 bis 245|
|Pour Point||ASTM D 97||°C||+4|
|Content of aromatic hydrocarbons||UV spektral.||%||<0,04|
|Doktor Test||DIN 51765||negativ|
esgeSparc SE 108 meets / exceeds the requirements of the most important manufacturers of EDM machines: AGIECHARMILLES, AGEMA, EXERON, FANUC, INGERSOLL, MAKINO, MITSUBISHI, ONA, SODICK, VOLLMER, ZIMMER & KREIM
If the barrels are stored outdoors, ensure that the ambient temperature is more than 5 ° C above the pour point of the product.